10
V. Installation Instructions
HA-CMSC-G2-3-WS/WD
5.5 Install Inlet Tube
The Face Plate of the unit has two (2) 4” Ø Inlet Ports. One of the Inlets
Ports may be sealed with an Inlet Port Cover Plate, while the other is
uncovered.
Note that, for Single Inlet operation, either Inlet Port can be used depending
on the preferred arrangement. For Dual Inlet operation, remove the Inlet
Port Cover Plate to use both Inlet Ports.
5.5.1 Unscrew and remove the three (3) Thumb Screws that are
pre-mounted
around the uncovered 4” Ø Inlet Port on the Face
Plate, as shown in Fig. 4.
Fig. (4)
– Face Plate with Inlet Port
5.5.2 To wire the optional LED Lighting, reach into the Inlet Port and
carefully pull the LED Cable Socket out from within the unit. Note
that, the Face Plate may need to be opened to access the LED
Cable Socket if it cannot be easily reached.
Thumb
Screw
Inlet Port
Screw &
Washer
