21
V. Installation Instructions
HA-CMSC-G2-4-W
5.15 Configure and Prepare Face Plate
The Face Plate
of the unit has two (2) 4” Ø Inlet Ports. One of the Inlets Ports
is uncovered, while the other is sealed with an Inlet Port Cover Plate. Note
that, either Inlet Port can be used depending on the preferred arrangement.
5.15.1 Unscrew and remove the three (3) Thumb Screws that are
pre-mounted
around the uncovered 4” Ø Inlet Port on the Face Plate,
as shown in Fig. 15.
Fig. (15)
– Face Plate with Inlet Port
5.15.2 Reach into the Inlet Port and carefully pull the LED Cable Socket out
from within the unit, as shown in Fig. 15. Note that, the Face Plate may
need to be opened to access the LED Cable Socket if the LED Cable
Socket cannot be easily reached.
Thumb
Screw
Inlet Port
Cover Plate
Inlet Port
Screw &
Washer
LED Cable Socket
