11. Assembly and setup of Recumbent Bike
13
A. How to disassemble
the front shroud
After unpacking all of the components,
assemble and install the bike as per the following procedure.
CAUTION
· Please plug bike cord into standard voltage socket
(only for the bike with TV monitor).
· Please install the bike on even floor and avoid any
uneven surface.
· When installing, the bike with TV monitor should
be plugged into electrical socket which is grounded.
·Please remove dust or foreign materials from the bike
before test operation.
1. Unscrew 6 pcs of M5 x 10 Pan Head
Screw on the front shroud using a Phillips
Screwdriver.
2. Detach the front shrouds pushing them
toward rear foot.
Required tools
A : Phillips Screwdriver
B : 6 pcs of M5 x 10 Pan Head Screw
Caution : When disassembling the front shrouds,
be careful not to damage the pedal.
A. Phillips Screwdriver
B. 6 pcs of M5 x 10 Pan Head Screw
Required tools
1
2
