HDL Buspro HDL-MSM.431, User Manual

Page: 11 / 39

User Manual
SB-DN-SEC250K
Advanced Security Controller – User Manual
8
Exit Delay(10-180S)
When arming button is pressed, you should leave during the exit delay time otherwise it
will trigger the alarm targets.
More People Leave Mode
It’s very useful when there are many people going to leave and you want to arm this area
now. If the sensor detects two movement’s interval less than the exit delay, then it will
reset the delay time for the arming; if the sensor detects two movement’s interval larger
than the exit delay, then it will countdown the ‘Entry Delay’ time, and trigger the
corresponding targets.
ENTER BUZZER ON
The actions when entering the door, the targets can be a voice hint from music player or a
buzzer on controlled by relay module.
ENTER BUZZER OFF
The setting targets will be triggered if disarm is not happened after the Entry Delay time
elapses. Suggest to shutdown the same controlled targets as ‘ENTER BUZZER ON’.
When disarmed, it will trigger the ‘ENTER BUZZER OFF’ targets.
Beep Tone
This is specially used to work with the weather sensor (the 3
rd
party weather sensor
normally needs to connect to our dry contact module), under different weather situation, it
can trigger different targets.