HDL Buspro HDL-MSM.431, User Manual

Page: 15 / 39

User Manual
SB-DN-SEC250K
Advanced Security Controller – User Manual
12
5.4 Arming Settings
Area No.
Select one area, area No. is from 1 to 8.
Trigger when leaving
If enable the selection, it will trigger the targets when arming button is pressed; if do not
enable the selection, it will trigger the targets after the Exit Delay time.
Arming Modes
There are 6 arming modes can be set respectively, they are: VACATION ARM
、
AWAYARM
、
NIGHT ARM
、
NIGHT_G ARM
、
DAY ARM
、
DISARM ARM. Each mode can
control up to 32 targets.
Auto arming and disarming
1- Auto Arming
If the conditions are met(enable auto arming and within the set time), then it will
automatically work under the arming mode
2- Auto Disarming
If the conditions are met (enable auto disarming and within the set time), it will
automatically disarm