©
HDG Bavaria GmbH 06/2008
HDG Euro V3.0 with HDG Lambda Control 1 - V 1 - en
7 Commissioning the HDG Euro – Commissioning the HDG Euro
65
7.2 Commissioning the HDG Euro
Switching HDG Euro on
1.
Switch on the circuit breaker for the mains electricity supply, or
otherwise ensure the unit is provided with power.
2.
Turn on the emergency heating switch (if one has been installed).
✓
There is now electrical power in the HDG Euro.
✓
The indicator lamp in the emergency heating switch will light up.
✓
The control is activated.
✓
The controller self test is activated.
✓
The message “
Enter code
” appears in the display.
Configuring the control
1.
Press the
Plus
button.
✓
The value of the displayed code will be increased by one.
2.
Confirm the value with the
Arrow
button.
Language
✓
The message “
Language [D] Deutsch
” appears in the
display.
3.
Use the
Plus
or
Minus
button to select the desired language.
✓
The selected language will appear in the display.
4.
Confirm using the
Arrow
button.
✓
The language is set and the menu will advance to the next setting.
Boiler type
✓
The message “
Boiler type HDG Euro..
” appears in the
display.
5.
Read off the boiler type from the name plate on the boiler.
6.
Use the
Plus
or
Minus
button to select the appropriate boiler type.
✓
The selected boiler type will appear in the display.
7.
Confirm using the
Arrow
button.
✓
The boiler type is set and the menu will advance to the next
setting.
Hydraulic system
✓
The following message appears in the display:
“
System no.: 0
”.
8.
Use the
Plus
or
Minus
button to select the appropriate hydraulic
system.
✓
The selected hydraulic system will appear in the display.
9.
Confirm using the
Arrow
button.