5 Cleaning and maintaining the HDG Euro – How to proceed
54
HDG Euro V3.0 with HDG Lambda Control 1 - V 1 - en
©
HDG Bavaria GmbH 06/2008
2.
Press the
“Reload”
button.
3.
Open the ash door (1).
4.
Proceed as described under Inspecting the filling hatch in this
chapter.
5.
If the door is not properly sealed, tighten the hexagon head
screw (2) slightly.
6.
Inspect again.
✓
The ash door is sealed.
7.
Close the ash door again properly.
✓
The inspection of the ash door is completed.
Inspecting the cleaning
door
1.
Remove the upper cladding (1) by lifting it upward.
2.
Proceed as described under Inspecting the filling hatch in this
chapter.
3.
If the seal is not tight, use a 19 mm fork wrench to tighten the
hexagon head nut (2) one turn.
Figure 5/16 - Inspecting the door seals
1
2
Figure 5/17 - Inspecting the door seals
1
2
3