4 Using the HDG Euro – Displaying information
26
HDG Euro V3.0 with HDG Lambda Control 1 - V 1 - en
©
HDG Bavaria GmbH 06/2008
4.4 Displaying information
You can call up a variety of information on the display of the HDG
Lambda Control 1.
✎
See section “4 Using the HDG Euro” in chapter “4.3 Structure of
the menus”.
Requirements
Before the HDG Euro can be switched on and information and
settings can be accessed and changed, the following requirements
must be met.
•
The HDG Euro has been commissioned by authorised specialists.
•
The fuse on the power supply is switched on.
How to display information
✎
See chapter “4 Using the HDG Euro”, section “4.1 Overview of the
controls and display components”.
Certain information and settings can only be accessed and changed
in “Heat production on” or “Heat production off”.
The buttons on the control panel of the HDG Lambda Control must
be pressed and held for approx. two seconds in order to jump to
another menu item.
If a button is not pressed after 30 seconds, the selection menu will
be abandoned automatically.
