4 Planning and installation – Installing the heating system
43
I
NSTALLING
THE
MANUAL
ASH
REMOVAL
1.
Guide the sealing plate with the welded screw (3) through the
opening (2) for the ash removal auger.
2.
On the opposite side, install the sealing plate (1) with the M10 (size
17) nut and M10 spring ring to the welded screw.
3.
Hang each ash door (3) with the semi-circular rivets into the
hinges.
4.
Assemble the door cladding (1) with the M5 (size 8) screws and M5
washer onto the ash door (3).
5.
Place the ash pan (4) in the ash compartment.
6.
Seal each ash door (3) using the star grip screw (2).
✓
The manual ash removal is installed.
Figure 4/9 - Installing the sealing plates
1
3
2
Figure 4/10 - Installing the door cladding
1
4
3
2
