Disclaimer:
3
rd
party and/or custom firmware providing extra features are not covered in this manual.
38
4K Vertex – User Manual
The CONFIG section of the USB GUI for Windows PC:
[AUTO SWITCH]
:
When activated, the Auto Switch feature will force the Vertex unit to automatically
switch to the active signal if the selected signal is lost.
[PRIORITY]
: When in
FORCED
input priority mode, as soon as a new active input is detected, Vertex will
switch to it.
[HDCP VERSION]
:
Allow you to select/force the HDCP revision of the TOP Output Port. Similarly to what
you can do from the push button on the unit (see page 10)
[LOGO LED]
: Enable by default
, GREEN
Vertex side logo can be turned ON/OFF at will. Some users might
found Vertex side logo visually disturbing in their HT setup. You have the possibility to turn them off.
[OLED DISPLAY]:
Enable by default
,
Vertex OLED display can be turned ON/OFF at will. Some users
might found the Vertex OLED display visually disturbing in their HT setup. You have the possibility to
turn it off.
[ROTATE 180 DEG]:
OFF by default, based on your setup, you might prefer to flip the OLED display, once
activated, this option will flip the Vertex OLED.
[REVERSE COLORS]:
OFF by default, once activated this option will reverse the Vertex colors.
