37
When the UPnP functionality is enabled, you can see the HD24613 in My Network Places of Win-
dows XP. The HD24613 can be given a
friendly name
that will be shown in My Network Places.
Double-clicking
the HD24613 icon in My Network Places will launch the default Web browser for
you to configure the AP.
3.6.2.2. System Log
System events can be logged to the on-board RAM of the HD24613 (
Local log
) or sent to a remote
computer on which an SNMP trap monitor program runs (
Remote log by SNMP trap
). See the next
subsection for more information about SNMP trap settings.
Fig. 50. System log settings
The system events are divided into the following categories:
General
: System and network connectivity status changes.
Built-in AP
: Wireless client association and WEP authentication status changes.
MIB II traps
:
Cold Start
,
Warm Start
,
Link Up
,
Link Down
and
SNMP Authentication
Failure
.
RADIUS user authentication
: RADIUS user authentication status changes.
NOTE:
The
SNMP Authentication Failure
trap is issued when using an incorrect community string to
manage the HD24613 via SNMP and the SNMP MIB II OID,
snmpEnableAuthenTraps
, is enabled
(
disabled
by default).
3.6.2.3. SNMP
The SNMP (Simple Network Management Protocol) functionality can be disabled, and you can spe-
cify the name (used as a
password
) of the read-only and read-write community. In addition, up to 5
SNMP trap targets can be set in the
SNMP Trap
Table
.
