H B X E C O - 0 6 0 0 G e o t h e r m a l C o n t r o l
V e r s i o n 1 . 0 . 0
Page 14
WI-FI SETTINGS
Once you have selected the appropriate network
and you have entered the correct password for
that 2.4GHz network, pressing Ready will establish
a connection to the Wi-Fi network. Attempting to
connect to Wi-Fi the display will say Updating Settings,
before showing Connecting to Wi-Fi, Please Wait. The
controller is now trying to connect to Wi-Fi and it may
take upwards of 120 seconds. If the controller backs
out of the WI-FI Settings then just re-enter the page
and wait. After it has counted down it will display
either Now Connected to, Server. It is now connected
to its 2.4GHz network and the Wi-Fi symbol on the Main
Screen will appear soon after. If the connection was
unsuccessful it will display Press to Connect, Ready.
Click on Ready and begin the connection process
again. If Now Connected to, Wi-Fi is displayed you
may need to open port 1314 on your network router.
Wi-Fi SSID Scan
– Pressing this will allow the ECO-0600
to actively scan for all available networks that you
can choose from, and then you may select the 2.4
GHz network that you wish to connect to.
Wi-Fi SSID Manual Entry
– This is where you can
manually input the 2.4GHz SSID network that you want
to connect to, use this method if the network does
not auto populate when you perform the Wi-Fi SSID
Scan. Ensure that you input this network exactly how it
would appear, including spaces, numbers, capital or
lowercase letters and or special characters.
Wi-Fi Password
- Input the password for the 2.4 GHz
SSID network that you are connecting to. (capital
letters, special characters, numbers and lower case
characters all available).
Press to Connect
- Once you have selected the
appropriate network and you have entered the
correct password for that 2.4GHz network, pressing
Connect Now will establish a connection to the Wi-Fi
network.
If the connection is successful the option will display
“Server”. If the connection is not successful the option will
display ready. If it displays “Wi-Fi” you may need to open
port 1314 on your network router.
Summary of Contents for ECO-0600
Page 1: ...HBX Control Systems Inc Installation Manual ECO 0600 Version 1 0 0 ECO 0600 Geothermal Control...
Page 26: ...H B X E C O 0 6 0 0 G e o t h e r m a l C o n t r o l V e r s i o n 1 0 0 Page 24 NOTES...
Page 27: ...H B X E C O 0 6 0 0 G e o t h e r m a l C o n t r o l V e r s i o n 1 0 0 Page 25 NOTES...
