HBM PW15iA, Mounting Instructions, Page: 14 / 104

Structure and mode of operation
12
A4359-1.0 HBM: public
PW15iA
3.2 Signal conditioning
FMD
ASF ICR
SZA
SFA NOV, RSN
LDW, LWT
LIC
PVA
IMD
LIV
TAV, TAS
Net
measured
value
Gross
measured
value
Extreme
values
Trigger/
Stop
Limit
values
Data
rate
Working
standard
calibr.
Filter Tare
A
D
User-defined
scaling
Lineari-
zation
Min/
Max
Trigger
Limit
values
RUN
BRK
Coarse Flow
Fine Flow
Ready
Alarm
Dosing control
Fig. 1.2 Signal conditioning
Digitization is followed by filtering, using digital filters
adjusted by the software. The
ICR command changes
the output rate (measured values per second).
In the working standard calibration of the electronics (on
delivery), 0 mV/V corresponds to zero and the maximum
capacity is either 1,000,000digits (NOV≠0), or
5,120,000digits (NOV=0). The two parameters LDW and
LWT give you the opportunity to adapt the characteristic
curve to meet your requirements (scale curve) and you
can use the
NOV command to standardize the measured
values to the required scaling value (e.g. 3000d).
Detailed information can be found in the command docu­
mentation and in the online help for the PanelX program.
You also have the opportunity to
S
switch from gross to net signals,