If the communication fails, a failure message will appear.
To check and correct your configuration, click
Set up CalStack...
again.
After setting up the CalStack, the ISOBE5600 Calibration and Verification
software will return to the
Calibration
or
Verification
window.
4.8.6
Exit the ISOBE5600 Calibration and Verification software
You can exit the ISOBE5600 Calibration and Verification software in the
ISOBE5600 Calibration and Verification
or
Mainframe Selection
window.
Figure 4.14:
Exit (Mainframe Selection window)
A
Exit
Click
Exit
to exit the Calibration and Verification software.
ISOBE5600
66
I2716-4.0 en
