4.8.2
Organization information
The ISOBE5600 Calibration and Verification software allows you to specify the
calibration lab name and the name of the operator.
HINT/TIP
This information is stored inside the acquisition card during the calibration and
verification process. When using the ISOBE5600m to making any recordings
with this card this information then is stored within the PNRF file for automatic
traceability of your calibration information.
Enter Organization information
When you start the ISOBE5600 Calibration and Verification software the first
time, the
Organization information
is empty and should be filled in.
Figure 4.4:
Organization information
1
Fill in the name of the:
l
Company
l
Operator
l
Country
2
Then click
Save
to save your information.
HINT/TIP
The company name that is entered here is also displayed in
Perception
software
under
Hardware Properties
.
ISOBE5600
58
I2716-4.0 en
