HBK CB1010, Operating Manual

Page: 24 / 104

CANHEAD
CONFIGURATION
22
CAUTION
Do not open the amplifier module housing.
6.4.1 Removing and installing the amplifier module
CAUTION
The amplifier module must be de‐energized before installation or removal.
S
Removal: Hold the amplifier module by the recessed grips and pull it upward
S
Installation: Insert the amplifier module into the VG strip. When installing, make sure
that you hold the module parallel and exert an even pressure as you push it onto the
VG strip.
6.5 Forms of assembly
The base modules can be attached in various ways:
S
With a standard adapter (Order No. 1‐CANHEAD‐MOUNT) for bolting to a sub‐floor or
S
Alternatively, by special adhering or adhesive fasteners (Velcro strip) if the sub‐floor
must not be damaged (not included among the items supplied)