Use Only Genuine Hayward Replacement Parts.
Connecting The Viio Cleaner To Pool
6
Installing Universal Wall Fitting
Builders:
Install the Dedicated Return Line at the
midpoint of the pool’s long wall.
Specification
: Dedicated Return Line in Pool Wall.
Depth:
At least 15 cm below water level.
Size:
1-1/2 inch BSP Female Threaded.
1.
Flush plumbing lines before proceeding.
2.
Turn Booster Pump and Main Filtration Pump
OFF
.
3.
Remove plug or existing Universal Wall Fitting from
previously installed pool cleaner (if any).
4.
Remove the Universal Wall Fitting (part O) and
Teflon
®
tape from Bag #1.
5.
When installing or re-installing the Universal Wall
Fitting use Teflon
®
tape on its plastic threads. Leave
two starting threads on the end of the Universal
Wall Fitting un-taped.
6.
Screw the Universal Wall Fitting into the Dedicated
Return Line.
Important:
Turn the Universal Wall Fitting 1 full turn
to the right to engage starting threads. Be sure both
parts are started properly (not cross threaded) then
resume tightening – hand tighten only.
The
Universal Wall Fitting may not screw all the way
into the Dedicated Return Line.
Do not over tighten.
Teflon
®
is a registered trademark of E.I. du Pont de
Nemours and Company.
Universal Wall Fitting
Dedicated Return Line
Universal Wall Fitting (O)
