Page 6 of 20
HEATPRO HEAT PUMP
HP13023770 Rev: E
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Pomona, CA Clemmons, NC Nashville, TN
Tel: 908.351.5400 www.haywardpool.com
Installation Specifications
Receipt Inspection of Heat Pump Unit
The carton bears specific warnings stating “DO NOT DROP OR TAILGATE”, as well as arrows indicating the
correct vertical positioning. THE HEAT PUMP
MUST NOT
BE TIPPED OR TRANSPORTED ON ITS SIDE
AS EVAPORATOR “OIL LOGGING” MAY OCCUR. Inspect the heat pump carton upon receipt for possible
damage in shipment. A punctured or oil-soaked area of the carton could indicate damage to the sealed
refrigeration system. If damage has occurred or is suspected, bring it to the immediate attention of the delivery
carrier.
Upon arrival at the installation site, the heat pump unit should be carefully unpacked and inspected for any
damage that may have occurred in transit. Minor indentations to the aluminum evaporator fins will not affect
performance of the heat pump unit.
THE MANUFACTURER CANNOT ACCEPT RESPONSIBILITY FOR
DAMAGE INCURRED OR REPAIRS NECESSITATED DUE TO IMPROPER
HANDLING OF OUR EQUIPMENT
Location
-
Determining Optimum Location
THE LOCATION OF THE HEAT PUMP IS VERY IMPORTANT FOR EFFICIENT OPERATION.
In order of importance, the installer must consider the following conditions:
•
The heat pump will perform more efficiently when placed in
direct
sunlight.
•
Ample air intake with avoidance of air re-circulation
•
Accessibility of service panels
NOTICE -
DO NOT install the heat pump unit in a fully enclosed space (i.e. garage, shed etc). Failure to
follow this instruction may result in poor performance, property damage, and voided warranty.
