USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Page 24 of 76
HCP3000 SERIES Variable Speed Pump
ISHCP3000VSPC Rev -B
6.10 Stop/Resume
Screen
1.
2.
Note:
When Stop/Resume is pressed at any time during normal operation, the above message will be displayed.
The pump will stop within several seconds, and will remain stopped until Stop/Resume is pressed a second time, at
which point the pump will resume normal operation.
6.11 Quick Clean
Screen
1.
2.
3.
Note:
The above message will be displayed while Quick Clean is running. Quick Clean mode runs at the MAX allowed
speed and expires after 60 min, and it may be cancelled early by pressing the Stop/Resume button, at which time
the pump would return to normal operation.
6.12 Remote Stop
Screen
1.
Note:
The above message will be displayed when an installed remote stop switch is activated. The pump will
remain stopped until the remote stop switch is deactivated.
Pump is stopped;
press STOP/RESUME
again to resume
normal operation.
Remote Stop
is engaged
Quick Clean
Quick Clean running
Quick Clean
press resume to end.
Quick Clean
3450 rpm for 60 min;