USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
50
If Accessories is selected:
Add Accessory -
Pressing “Add Accessory” from this screen will take you through
the full configuration for adding a new accessory to the Backyard. These steps are
described in the Configuration Wizard portion of this manual.
Select an Accessory -
Once you select an accessory, all of the options for that Back-
yard accessory will appear on the next screen. These options are as follows:
Name -
Rename the accessory to whatever name is desired.
Relay -
Select the relay that the accessory is wired to.
Delete an Accessory -
From this screen, if you wish to delete an accessory that is
currently configured, select the trash can on the right of the name of the accessory
that you wish to delete.
NOTE: The system does not allow you to configure a pump or a valve to accessory equipment
in the Backyard.
If Sensors is selected:
Add Sensor -
Pressing “Add Sensor” from this screen will take you through the full configura-
tion for adding a new sensor. These steps are described in the Configuration Wizard portion of
this manual.
Select a Sensor -
Once you select a sensor, all of the options for that sensor will appear on the
next screen. These options are as follows:
Name -
Rename the sensor to whatever name is desired.
Location -
Select the location that the sensor is wired to.
Delete a sensor -
From this screen, if you wish to delete a sensor that is currently configured,
select the trash can on the right of the name of the sensor that you wish to delete.
If Interlocks is selected:
Add Interlock -
Pressing “Add Interlock” from this screen will take you through the full configu-
ration for adding a new interlock. These steps are described in the Configuration Wizard portion
of this manual.
Select an Interlock -
Selecting an interlock from this screen will allow you to view that inter-
lock’s configuration. However, you cannot edit a pre-existing interlock. In order to change an
interlock’s configuration, you have to delete the obsolete interlock and create a new one.
Delete an Interlock -
From this screen, if you wish to delete an interlock that is currently con-
figured, select the trash can on the right of the name of the interlock that you wish to delete.
NOTE: If there are currently no interlocks configured on your system, then the button will ap-
