1
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Compatibility
Pro Logic
The AQL-SS-6B-x is compatible with all Pro Logic P-4 and PS versions. The AQL-SS-6B can
control 6 separate functions. The remote is configurable, allowing the user to assign buttons to
specific functions within the Configuration Menu.
The AQL-SS-D is compatible with all Pro Logic PS versions only. The AQL-SS-D can control 8
functions and provides spa and air temperature via the backlit LCD display. In addition to viewing
temperatures, you can also set the spa heater temperature with the AQL-SS-D remote control.
Aqua Logic
The AQL-SS-6B-x and AQL-SS-D-x (where the x denotes the color; W=white, G=gray, B=black)
are compatible with all PS Aqua Logic controls that use software version 2.40 or later (refer to the
Aqua Logic manual to determine software version). The AQL-SS-6B is also configurable when
used with the Aqua Logic P-4 running software version 2.40 or later. The AQL-SS-6B is compat-
ible with PS and P4 models prior to version 2.40, but is not configurable (the buttons are fixed to
operate specific functions).
For PS systems with software version 2.40 or later:
Both units allow the user to assign buttons to specific functions. The AQL-SS-6B can control 6
separate functions. The AQL-SS-D can control 8 functions and provides spa and air temperature
via the backlit LCD display. In addition to viewing temperatures, you can also set the spa heater
temperature with the AQL-SS-D remote control. Both models are configured through the configu-
ration menu in the Aqua Logic.
For P4 systems with software version 2.40 or later:
The AQL-SS-6B can control 6 separate functions. The remote is configurable, allowing the user
to assign buttons to specific functions within the Configuration Menu. The AQL-SS-D is not com-
patible with these systems.
For PS and P4 systems with software prior to version 2.40:
Only the AQL-SS-6B can be used with these systems and is preconfigured to operate specific
functions. The buttons can not be assigned. The diagram below shows the button functions and
locations for the AQL-SS-6B when used with Aqua Logic models running software prior to version
2.40. The AQL-SS-D is not compatible with these systems.
Installation
The AQL-SS-6B and AQL-SS-D are double insulated, waterproof devices that are designed for
installation at the water’s edge. The remote controls are typically installed at the tile-line of the
spa wall, or in the deck, within arm’s reach of a spa occupant. Before the pool/spa construction
is complete, run electrical conduit from the desired remote location back to the Pro Logic or Aqua
Logic. The installation of the remote should be AFTER the pool/spa construction is complete. For
new tile and concrete applications, optional Mud Boxes (Goldline part AQL-SS-6B-BOX and AQL-
