background image

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS

14

LIMITED WARRANTY 

(effective 03/01/12) Hayward warrants its Pro Logic, OnCommand and E-Command 

pool automation products as well as its Aqua Rite, Aqua Rite Pro, Aqua Plus and SwimPure chlorination 

products to be free of defects in materials and workmanship, under normal use and service, for a period 

of three (3) years.  Hayward also warrants its Aqua Trol chlorination products to be free of defects in 

materials and workmanship, under normal use and service for a period of one (1) year.  These warran-

ties are applicable from the initial date of purchase on private residential swimming pools in the US and 

Canada.  Installations of product for use on commercial pools in the US and Canada is covered for a 

period of one (1) year for defects in materials and workmanship.  Hayward warrants all accessories and 

replacement parts for the above-identified pool automation and chlorination products for a period of one 

(1) year.  Accessories also include remotes, actuators, base stations, temperature sensors, flow switches 

and chemistry probes.  Each of these warranties is not transferable and applies only to the original owner.

Hayward shall not be responsible for cartage, removal, repair or installation labor or any other such costs 

incurred in obtaining warranty replacements or repair.

Proof of purchase is required for warranty service.  If written proof of purchase is not provided, the 

manufacturing date code will be the sole determinant of the date of installation of the product.  To obtain 

warranty service or repair, please contact the place of purchase or the nearest Hayward authorized war-

ranty service center.  For more information on authorized service centers please contact the Hayward 

Technical Service Support Center (61 Whitecap Road, North Kingstown RI, 02852) or visit the Hayward 

web site at www.hayward.com.

WARRANTY EXCLUSIONS:

1. Material supplied or workmanship performed by others in process of installation.

2. Damage resulting from improper installation including installation on pools larger than the product rating.

3. Problems resulting from failure to install, operate or maintain the product(s) in accordance with the 

recommendations contained in the owners manual(s).

4. Problems resulting from failure to maintain pool water chemistry in accordance with the recommenda-

tions in the owners manual(s).

5. Problems resulting from tampering, accident, abuse, negligence, unauthorized repairs or alternations, 

fire, flood, lightning, freezing, external water, degradation of natural stone used in or immediately adjacent 

to a pool or spa, war or acts of God.

6. Use of a non-genuine Hayward replacement salt chlorination cell on any Hayward automation or 

chlorination product will void the warranty for that product.

The express limited warranty above constitutes the entire warranty of Hayward Pool Products with 

respect to its products and is in lieu of all other warranties expressed or implied, including warranties of 

merchantability or fitness for a particular purpose. In no event shall Hayward Pool products be responsible 

for any consequential, special or incidental damages of any nature.   Some states do not allow a limitation 

on how long an implied warranty lasts, or the exclusion of incidental or consequential damages, so the 

above limitation may not apply to you.  This warranty gives you specific legal rights, and you may also 

Summary of Contents for AQL-SS-6B

















Reviews: