5
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Wiring Configurations
Up to 3 wired remote controls of any type can be connected to the Pro Logic or Aqua Logic. The
AQL-SS-6B and AQL-SS-D are wired to the Pro Logic/Aqua Logic in one of 3 ways, depending on
how many wired spa side controls will be used. Refer to diagram on page 4. For a single remote
control, use “Configuration A” wiring instructions. For two remote controls of the same type, use
“Configuration A” on one remote, and “Configuration B” on the other. If not the same type, use
“Configuration A” for both. For 3 remote controls of the same type, use “Configuration A” on one
remote, “Configuration B” on another, and “Configuration C” on the last. If not the same type, use
“Configuration A” for one remote type, and use “Configuration A” and “Configuration B” for the
other type. All remotes are connected to the same terminal block.
The connection of the brown conductor will determine the configuration. The other 4 conductors
will always connect to their corresponding screw terminals (White wire goes to “Yellow” labeled
screw terminal) on the Pro Logic/Aqua Logic terminal block.
Configuration
For all Pro Logic systems and Aqua Logic systems with software version 2.40 or later, it is neces-
sary to configure the Aqua Logic to operate with the AQL-SS-6B or AQL-SS-D. Note that the
AQL-SS-D cannot be used with any P-4 models. For Aqua Logic systems with software version
less than 2.40, only the AQL-SS-6B can be used and no configuration is possible. Follow the
information below.
For Pro Logic and Aqua Logic PS and P4 systems with software version 2.40 or greater:
Access the Configuration Menu
NOTE: The configuration menu automatically “locks” after 2 minutes of no buttons
being pressed to prevent unauthorized people from changing the control logic
inadvertently and possibly damaging the pool equipment or causing a “call back” to
fix the configuration.
Scroll to “6B Spa Config.” or “Digital Spa Config.” depending on your model.
If using AQL-SS-6B:
Configuration
Menu-Unlocked
Configuration
Menu-Locked
Press repeatedly until “Configuration Menu” is displayed
Move to configuration menu items
Press BOTH buttons SIMULTANEOUSLY for 5 seconds to unlock
Menu
>
>
>
>
6B Spa Config.
+ to view/change
6B A, Button 1
Pool/Spa
Select 6B Spa
A
Push to access the 6 Button Spa Side Remote options
Rotates between System Off, Pool/Spa, Filter, Lights, Heater1, Valve3,
Valve4, and all available Aux outputs
Rotates between all available remotes
Move to previous/next configuration menu item
Move to previous/next configuration menu item
Move to next menu item
+
+
+
>
>
>
>
>
>
if AQL-SS-6B is connected
