Aqua Rite Pro
Side mounting AQL-CHEM to the Aqua Rite Pro:
Side mounting the AQL-CHEM will
require drilling 3 mounting holes through the Aqua Rite Pro enclosure. Dimples have
been pre-punched on the enclosure at the drilling location (template not needed).
After drilling, be sure to remove any burrs and brush away any metal shavings.
Route Probe Cell cable through the access hole at the bottom of the mounting
bracket BEFORE screwing the bracket in place. For easiest installation, fasten the
nylon lock nut loosely, then slip the bracket keyhole slots over the bolt head and
tighten. After installation, coil excess cable in the Aqua Rite Pro enclosure. Refer to
the diagram below.
Pro Logic
Side mounting AQL-CHEM to Pro Logic:
Side mounting the AQL-CHEM will require
drilling 3 mounting holes through the Pro Logic enclosure. A drill template is included
with the AQL-CHEM to assist with the positioning of the holes. After drilling, be sure
to remove any burrs and brush away any metal shavings. Route Probe Cell cable
through the access hole at the bottom of the mounting bracket BEFORE screwing the
bracket in place. For easiest installation, fasten the nylon lock nut loosely, then slip
the bracket keyhole slots over the bolt head and tighten. After installation, coil
excess cable in the Pro Logic enclosure. Refer to the diagram below.
3
Route probe cell cable
through access hole
BEFORE mounting.
metal washer
rubber
washer
Aqua Rite Pro
enclosure wall
AQL-CHEM
bracket wall
Zip Tie and store extra
cable length here
Side Mounting
AQL-CHEM to Aqua Rite Pro
Route probe cell cable
through access hole
BEFORE mounting.
metal washer
rubber
washer
Pro Logic
enclosure wall
AQL-CHEM
bracket wall
Side Mounting
AQL-CHEM to Pro Logic
Zip Tie and store extra
cable length here
16
Winterizing
The AQL-CHEM probes must be protected from freezing conditions. If the pool is
winterized, plan to remove and store the probes (as described above) as part of the
normal pool winterizing process. The Probe Cell and related plumbing must be drained
as well. BNC connectors should be capped with the original protective covers. A
winterizing kit with probe caps, BNC covers, and other necessary winterizing acces-
sories is available to replace any missing items. Contact your local Hayward dealer for
more information.
