7
6
INSTALLATION
Sizing Suction Hose
Step 1
Connect hose sections.
Note: Make sure all connections
are tight to prevent air leaks.
TIP:
Wetting the hose ends will
make it easier to connect the
hose sections.
If optional leaf canister is purchased, install between 1st and 2nd
hose sections starting from the wall connector or skimmer.
+2
Step 2
Pull hose to farthest location in the pool opposite the wall connector or
skimmer
+ 2 extra hose sections.
Step 3
Fill hose completely with water.
Insert flow gauge onto the leader
hose. Attach the C-clip of the
gauge onto the 1st hose section.
Make sure the flow gauge is under water.
FLOW GAUGE
C-CLIP
LEADER HOSE
FIRST HOSE
SECTION
TO SKIMMER
OR VAC-LOCK
+2