background image

Raypak

Indirect

Pool

Heaters

INSTALLATION AND 

OPERATION MANUAL

WARNING:

 If these instructions are not followed exactly, a fire or explosion may 

result causing property damage, personal injury or death

FOR YOUR SAFETY:

 Do not store or use gasoline or other flammable vapors and 

liquids or other combustible materials in the vicinity of this or any other appliance. 

To do so may result in an explosion or fire.

WHAT TO DO IF YOU SMELL GAS:

 

•   Do not try to light any appliance.

  •   Do not touch any electrical switch; do not use any phone in your building.

  •   Immediately call your gas supplier from a neighbor’s phone. Follow the gas    

      supplier’s instructions.

  •   If you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, service agency 

or the gas supplier.

This manual should be maintained in legible condition and kept adjacent to the heater or in another safe place 

for future reference.

P/N 241399 Rev. 5

Effective: 04-30-21

Replaces: 12-15-20

Model Series RP-045 through 

RP-995 and B Ti-180 through

B Ti-500

Summary of Contents for 013476












Reviews: