Haybuster 2100 BALEBUSTER, Operating Instructions And Parts Manual, Page: 23 / 90

15
2 1 0 0 B A L E B U S T E R O P E R A T I N G I N S T R U C T I O N S
Section 3: Machine Operation
3.1 Introduction to the machine
3.1.2 Operator’s station/controls
Operator controlled items:
• Loading tines, to load the bale. One tractor hydraulic circuit is used to control loading tines. (See
section 3.2.6 for more information.)
• The PTO shaft, which runs the rotor.
• The bale conveyor chain. Another tractor hydraulic circuit is used to control the bale conveyor’s speed
and direction. If the tractor is equipped with a PFC circuit, use it to control the bale conveyor.
Adjustable items:
• The conveyor speed control valve (See section 3.4.2 for more information.)
• Slug bar setting (See section 3.4.2 for more information.)
• Deflector settings (See section 3.4.1 for more information.)
Figure 3.1
Front view of the 2100
BALEBUSTER