Haybuster 2100 BALEBUSTER, Operating Instructions And Parts Manual

Page: 19 / 90

11
2 1 0 0 B A L E B U S T E R O P E R A T I N G I N S T R U C T I O N S
7. The discharge deflector is adjustable to allow forage to be spread to any desired width.
8. Slug bars in front of rotor may be adjusted to expose more or less of the flail knives by adding or
subtracting washers.
(See section 3.4, “Adjusting the machine” for more information)
9. Check wheel bearings, and seals
10. Torque flail knife anchor bolts, 200 ft. Ibs.
11. Relieve all pressure in the hydraulic system before disconnecting the lines or performing other work on
the system. Make sure all connections are tight and lines are in good condition before applying pressure
to the system.
1.7 Towing/road transport
This machine is designed to fold for ease of transportation and storage.
1. To fold rack and deflector, loader and tine frame:
a. Raise the deflector to it’s highest position.
b. Unlock rack strap. Fold rack and deflector into chamber.
c. Tilt hinge frame hydraulically to allow loader tine frame to be folded into transport position.
Lock tine frame pin in transport position.
d. Tilt hinge frame hydraulically into transport/storage position.
2. Use good judgment and drive slowly over rough or uneven terrain.
3. Be sure tractor brakes are properly adjusted and foot pedals are locked together.
4. Check your state laws regarding the use of lights, slow moving vehicle signs, safety chain and other
possible requirements.