12
2 1 0 0 B A L E B U S T E R
O P E R A T I N G I N S T R U C T I O N S
Section 2: Dealer preparation
2.1
Assembly required
Park 2100 BALEBUSTER on flat surface, and block wheels.
Open shipping kit, verify that all parts are included.
Refer to the parts book portion, pages 38 and 39, Main Frame Assembly; and pages 54 and 55, Shipping Kit Hardware
for this portion.
1.
Attach adjustable hitch parts 8100654 and 8100655 (parts 27 and 26) to frame using the 1x3 and 3/4x2-1/
2 bolts as shown in the drawing. Tighten the bolts and nuts. Hole position will depend on the tractor
used, see section 3.2.2 for more information.
2.
Attach hitch brace 8100137 using the 5/8x2 bolts, as shown in the drawing.
3.
Attach link pins, 4800086 to hitch. If installing a quick tach, refer to pages 66 and 67, BALEBUSTER
Quick Tach for placement of parts.
4.
Install PTO shaft on Rotor shaft
A. Place key 6200020 in keyway.
B. Slide the machine end yoke of the PTO shaft over the rotor shaft and key.
C. Tighten the clamp bolt to lock the PTO yoke in place.
D. Tighten the set screw to hold the key in place.
Refer to pages 40 and 41, Shredder Front Assembly for this portion
5.
Install PTO shield 8101144 on 2100 BALEBUSTER using the 3/8x1 bolts as shown in the drawing.
6.
Be sure to measure shaft end distances when hitching to tractor, see section 3.2.2.
Summary of Contents for 2100 BALEBUSTER
