16
2. Engage the chain-brake (push it forward until an audible
click is heard).
3. Press and release the primer bulb 10 times.
4. Pull the choke control out to engage.
5. While holding the saw unit securely on the ground (one
foot holding down the rear handle, left hand holding the front
handle), pull the start handle four times to warm the engine.
At this stage, the engine will usually not start.
6. Push the choke control in to disengage. (Failure to do this
may cause the engine to flood).
2
3
10X
4
choke control
primer bulb
1
2
3
5
4X
6
