28
•
AIR FILTER - Replace.
•
Use the spark plug wrench to remove the spark plug (turn anticlockwise to remove).
•
Spark plug – Replace
STORAGE (30 DAYS OR LONGER)
•
CLEANING - Thoroughly clean the tool exterior.
•
INSPECTION - Inspect the entire tool for damage, including loose or missing components and
repair as necessary.
•
FUEL - Drain the fuel tank and then clear the carburetor and lines by running the tool until it stops
from lack of fuel.
•
LUBRICATION - Remove the spark plug and then pour approximately a teaspoon of 2 stroke oil
into the cylinder through the spark plug hole. Before reinstalling the spark plug, pull the starter 2
or 3 times to distribute the oil over the cylinder walls.
•
AIR FILTER - Remove, clean and reinstall the filter element.
•
STORAGE - Store the tool in a clean, dry, dust-free environment.
If necessary:
Retighten accessible fastening screws and nuts. You will avoid excessive wear and tear and damage
to the machine when you follow the instructions in this manual.
