21
OPERATION
When working with the machine, the appropriate safety guard must be fitted to prevent objects being
thrown out.
The integrated blade fixed on the safety guard automatically cuts the line to the optimum length.
ATTENTION!
Before operating, you must fill the machine with fuel.
Starting the unit
Do not start the brush cutter until it has been completely assembled.
Danger of injury!
Do not operate the device unless you did not find any faults. If a part has become defective, be
sure to replace it before you use the device again.
Check before use!
Check the safe condition of the machine.
Check the machine for leaks.
Check the machine for visual defects.
Check that all parts of the machine have been securely fitted.
Check that all safety devices are in proper condition.
Danger of injury!
Before starting work, always check the ground and remove all objects that could be thrown by the
machine.
Start
Once the machine has been set up properly, start the engine as follows:
1. Set the machine down on a hard, level surface.
2. Turn the engine switch (6) to the ‘I’ position.
6
