19
2. Hook the double belt harness into the strap support ring on the shaft tube.
3. Adjust the length of the harness so that the hook is approximately 15 cm below your waist.
In case of emergency, pull the rope of the quick release mechanism. The metal locking bar will be
released automatically because of the weight of the machine, and the machine will drop away from
you.
NOTE:
Let the cutting attachment rest lightly on the ground. When using the brush cutter blade, it
should balance about 10cm above the ground to prevent contact with stones and the like. Adjust the
position of the harness clamp to balance the unit correctly.
