3.2 Administrator Installation and Setup
WINDOWS 95/98/Me/NT/2000/XP
1)
2)
3)
POWER ON:
After you have correctly connected your print server to
your PC and router, please power on all units.
Before the installation, please verify that your network protocols are
installed on your PC (TCP/IP and/or IPX). If they are not installed,
please consult your operating systems manual for instructions on how
to do so.
INSTALL the Administrator Installation Program:
To install your
Print Server administration software, please follow the directions
listed below.
1. Insert the
Windows 95/98/Me/NT/2000/XP
Setup CD into your CD-
ROM.
(Windows should execute the
Autorun.exe
program automatically. If
not, run
Autorun.exe
manually from your CD-ROM drive’s root
directory).
2. The Hawking Installation windows manager will pop up on your
screen as follows:
3. Click on
“Admin Installation”
and the
“Utilities Setup”
window will
be displayed.
Summary of Contents for HWPS12UG
