86
Here are descriptions of every setup items:
Enable (1):
Check this box to enable special applications and
uncheck this box to disable virtual server.
IP Address (2):
Input the IP address of the computer which you want to
open the ports.
Computer Name (3): Pull down the menu and all the computers connected to
the Smart Repeater will be listed here. You can easily to
select the computer name without checking the IP
address of the computer.
TCP Port to Open (4): This is the out going (Outbound) range of TCP port
numbers for this particular application.
UDP Port to Open (5): This is the out going (Outbound) range of UDP port
numbers for this particular application.
Comment (6):
The description of this setting.
Pop. Applications
This section lists the more popular applications that (7):
require multiple connections. Select an application
from the Popular Applications selection and click ‘Add’
to save the setting to ‘Current Trigger-Port Table.’
Add (8):
Add the setting to the ‘Current Trigger-Port Table.’
Reset (9):
Click ‘Reset’ will clear all above setting and you can set
up again.
Summary of Contents for HW2R1
Page 1: ......
