68
Clear (9):
Click ‘Clear’ to remove the value you inputted in MAC
address and comment field.
After you finish with all settings, please click ‘Apply’ (10) button and the
following message will be displayed on your web browser:
Press ‘Go Back to save the settings made and go back to the web
management interface; press ‘Apply’ to save the settings made and restart the
Smart Repeater so the settings will take effect after it reboots.
If you want to reset all settings in this page back to previously-saved value,
please click ‘Cancel’ button.
2-7-5 Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is the simplest way to build a secure connection
between wireless users and the Smart Repeater. You do not have to select the
specific wireless security encryption mode and input a long encryption
passphrase each time a wireless user connects to your network. Instead you
only have to press a button on wireless user’s device (assuming WPS is
supported by that device) and push the ‘WPS’ button on the back of the
HW2R1, and WPS will automatically configure your wireless security settings
and wireless connection.
This Smart Repeater supports two types of WPS modes: Push-Button
Configuration (PBC), and PIN code. If you want to use PBC, you have to push
a specific button on the device of the wireless user (usually titled WPS) to start
the WPS mode. In addition the HW2R1 must be activated for WPS mode for
the connection to work. You can push Reset/WPS button of the Smart
Summary of Contents for HW2R1
Page 1: ......
