18
Input ‘ipconfig’, then press ‘Enter’ key. Please check the IP address followed
by ‘Default Gateway’ (In this example, the IP address of Smart Repeater is
192.168.1.200
,
please note that this value may be different.
)
3. Connect the Smart Repeater’s management interface by web browser
After your computer obtained an IP address from Smart Repeater, please start
your web browser, and input the IP address of Smart Repeater in address bar.
The following message should be shown (or you may type
in
http://setup.hawkingtech.com
to access the quick setup menu):
Please input user name and password in the field respectively, default user
name is ‘admin’, and default password is ‘1234’, then press ‘OK’ button, and
you can see the web management interface of this Smart Repeater.
NOTE: If the IP address of Gateway is not displayed, or the address followed
by ‘IP Address’ begins with ‘169’, please recheck network connection
between your computer and Smart Repeater, and / or go to the beginning of
this chapter, to recheck every step of network setup procedure.
Summary of Contents for HW2R1
Page 1: ......
