59
Fill the text box by following the rules below.
64-bit
– Input 10-digit Hex values (in the “A-F”, “a-f” and “0-9” range) or 5-digit
ASCII characters (including “a-z” and “0-9”) as the encryption keys. For
example: “0123456aef” or “test1”.
128-bit
– Input 26-digit Hex values (in the “A-F”, “a-f” and “0-9” range)
or 13-digit ASCII characters (including “a-z” and “0-9”) as the
encryption keys. For example: “01234567890123456789abcdef" or
“administrator”.
Link
Status
From the “Link Status” option, you can view
all the information of the network you are
connecting to. You can use this tool in while
at the same time repositioning the Hi-Gain
antenna to find the optimal location for
antenna placement.
Parameter Description
Status
Display the SSID and MAC ID of the network the card is connecting
to.
Current
Channel
Display the number of the radio channel and the frequency used for the
networking.
Link Speed
(Mbps)
Display the transmission and receiving rate of your current network. It
is the number of bits per second that can be transmitted.
Throughput
(Kbits/sec)
Throughput is the average rate of successful message delivery over a
communication channel.
Link Quality
This bar indicates the quality of the link. The higher the percentage,
the better the quality.
Signal Strength
This bar shows the signal strength level. The higher percentage shown
in the bar, the more radio signal been received by the card. This
indicator helps to find the proper position of the wireless device for
quality network operation.
dBm format
If you want to know the signal strength in the unit of dBm, select this
check box.