66
3-4-5 WPS - Wi-Fi Protected Setup
Wi-Fi Protected Setup (WPS) is the simplest way to build a secure connection between
wireless users and the Smart Dish Repeater. You do not have to select the specific
wireless security encryption mode and input a long encryption passphrase each time a
wireless user connects to your network. Instead you only have to press a button on
wireless user’s device (assuming WPS is supported by that device) and push the “WPS”
button on the back of the Smart Dish Repeater and WPS will automatically configure
your wireless security settings and wireless connection.
This Smart Dish Repeater supports two types of WPS modes: Push-Button Configuration
(PBC), and PIN code. If you want to use PBC, you have to push a specific button on the
device of the wireless user (usually titled WPS) to start the WPS mode. In addition the
Smart Dish Repeater must be activated for WPS mode for the connection to work. You
can push Reset/WPS button of the Smart Dish Repeater, or click “Start PBC” button in
the web configuration interface to do this; if you want to use a PIN code, you have to
know the PIN code of the wireless device and switch it to WPS mode, then provide the
PIN code of the wireless device you wish to connect to the Smart Dish Repeater. The
detailed instructions are below:
Click “Wireless Home” from the left side menu, then click “WPS”, and the following
message will be displayed:
Summary of Contents for HAW2DR
