93
addresses.
Enable IP
Check this box to enable IP address based
Filtering Table (11):
filtering, and please select “Deny” or “Allow”
to decide the behavior of IP filtering table. If you select deny, all
IP addresses listed in filtering table will be denied from
connecting to the network; if you select allow, only IP addresses
listed in filtering table will be able to connect to the network,
and rejecting all other network devices.
IP Filtering
All existing IP addresses in filtering table will be
Table (12):
listed here.
Add PC (13):
Click this button to add a new IP address to IP filtering table, up
to 20 IP addresses can be added.
Please refer to section 4-3-1-1 “Add PC” below.
Delete
If you want to delete a specific IP address entry,
Selected (14):
check the “select” box of the IP address you want to delete, then
click “Delete Selected” button. (You can select more than one IP
addresses).
Delete All (15):
If you want to delete all IP addresses listed here, please click
“Delete All” button.
After you finish with all of your settings, click “Apply” and the following message will
be displayed on your web browser:
Press “Go Back” to save the settings and go back to the web management interface; press
Summary of Contents for HAW2DR
