11.3 Electrical data
Power output
Value
Voltage nominal
50.4 V
Voltage maximal
58.8 V
Voltage minimal
35 V
Configuration (cells connected in series)
14S
Energy
12.0 kWh
Gross capacity achieved by
fully balanced pack in ex
works condition.
Energy density at cell level
693 Wh/l
Thermal reservoir at 30°C temperature increase
through discharge
8×10
7
A²s
Cell temperature maximal
55°C
Recommended charge duration for optimum
cycle life
4 h
Charge current duration, cell temperature
< 45°C.
113.9 A
Charge current max., 30 s, max. 3 times per
discharge, intervals of at least 1 min rest at
lower than
*
80 A,
cell temperature < 45°C.
227.8 A
Discharge current duration, cell temperature
< 55°C.
220 A
Discharge current max., 30 s, max. 5 times per
discharge, intervals of at least 30 s rest at lower
than
*
80 A,
cell temperature < 55°C.
400 A
Cell temperature discharge
-20 to 55°C
Cell temperature charge
5 to 45°C
Average heating rate
0.29°C/min
Low voltage (signal)
Inputs
Value
Start signal (terminal 15)
3.3 - 24 V (nominal)
Power consumption of relay, supplied internally
by battery
1.6 W
Outputs
Value
CAN bus (standard)
500 kbit/s
Start signal voltage range
The start signal can be chosen within a range from 3.3 to 24 V. At 3.3 V, even brief and slight undervolt-
age may lead to the battery switching off. We therefore recommend at least 5 V of voltage. A voltage of
24 V may be exceeded up to 28 V for brief periods of less than 5 seconds only.
36/39
B 6130 - 02-2022 - 1.0en
HAWE Hydraulik SE
