HAWE Hydraulik IEP 014-CP, Assembly Instructions Manual

Page: 27 / 39

9
Disassembly and disposal
Observe the following safety instructions additionally to the safety instructions in chapter For your
safety .
DANGER
Risk of fatal injury from electric shock
Touching live components directly or indirectly causes injury or death.
Electrical and electronic components must only be replaced and connected by trained specialist
personnel.
Obey all applicable electrical safety rules.
Only connect electric lines to the hydraulic system while the system is de-energized.
WARNING
Electrical and magnetic elds
Consumers connected to the battery can generate electrical and magnetic elds. These elds affect the
operation of heart pacemakers and implanted defibrillators.
Wearers of heart pacemakers and implanted defibrillators must maintain a sufcient distance from
magnets.
Wearers of such devices must be warned against approaching too closely to magnets.
Block off the area around the drive system, and provide suitable warning signs on the barriers.
WARNING
Risk of injury through crushing or cutting
Body parts might get trapped or cut off between the machine frame and hydraulic system in the event of
careless transport, installation and de-installation.
Never reach between the hydraulic system and the machine frame.
Ensure that other people cannot enter the danger area.
Wear gloves and work shoes.
Removal
1. Release.
2. Secure the device against being switched on again inadvertently.
✓
The system is securely switched off.
3. Check that it is electrically dead.
4. Cover and block off adjoining live parts.
5. Disconnect the electrical connections (connector).
6. Dismantle the electrical components (battery pack).
7. Correctly dispose of all dismantled parts.
Disposal
Dispose of electronic components and fastening materials as follows:
Dispose of components and packaging in accordance with the relevant regional waste catalogue. (If
necessary, contact HAWE Mattro GmbH for advice.)
Dispose of electronic components in accordance with the regulations for the approved collection
points or approved waste disposal companies.
Dispose of metal via approved waste disposal organisations.
HAWE Hydraulik SE B 6130 - 02-2022 - 1.0en 27/39