16
Operation
Cleaning
Important
•
Do not use metal utensils to remove ice
cream from the inner bowl.
•
Do not remove the inner bowl from the
freezer until ready to make ice cream.
Hints
•
We suggest that you keep the inner bowl
in the freezer so that it is ready for use.
Place in a plastic bag before freezing. Freeze
the inner bowl in the upright position.
•
Always make sure the inner bowl is
thoroughly dry before placing in the freezer.
•
Do not puncture or heat the inner bowl.
•
The inner bowl should be placed in a
freezer that is operating at a temperature
of -18° Centigrade ( -0.40° Fahrenheit) or
below for 8 hours before use.
•
For best results always
refrigerate the ingredients before
making ice cream.
•
The addition of alcohol to recipes
inhibits the freezing process.
•
Always switch off, unplug and dismantle
before cleaning.
•
Never put the power unit in water or let the
cord or plug get wet.
•
Do not wash parts in the dishwasher.
•
Do not clean with scouring powders, steel
wool pads, or other abrasive materials.
Power unit
•
Take out the power unit from the lid.
•
Wipe with a damp cloth, then dry.
Lid
•
Wash the lid then dry thoroughly.
Paddle
•
Take out the paddle from the inner bowl.
•
Hold up the upper fitting and turn the
lower fitting anticlockwise, then dismantle
the lower fitting from the paddle.
•
Wash then dry thoroughly.
•
Fit the upper fitting and the lower
fitting into the paddle again.
Outlet pedestal unit
•
Take out the outlet pedestal unit
from the outer bowl.
•
Wash the outlet pedestal unit
then drythoroughly.
Inner Bowl
•
Allow the inner bowl to reach room
temperature before attempting to clean.
•
Take out the inner bowl and wash the inside
of the bowl, then dry thoroughly.
Outer Bowl
•
Pull out the outer bowl from the supporter.
•
Wash then dry thoroughly.
Supporter
•
Wash then dry thoroughly.
Upper
Loose
Tight
Fitting
Lower fitting
