Hauppauge WinTV USB, Installation And Reference Manual

Page: 8 / 55

Installing the WinTV boards
The WinTV boards are Plug-and-Play devices designed for
WindowsXP. Plug-and-Play simplifies the installation and hardware
setup of WinTV by having hardware settings assigned by Windows,
instead of needing to set jumpers. This chapter describes how to install
these boards and how the automated Plug-and-Play installation proce-
dure works .
Installation overview
To install WinTV under WindowsXP, you will follow these steps:
✓
Install the WinTV board in your PC
✓
After booting Windows, you will install WinTV’s Windows device
driver from the WinTV Installation CD-ROM
✓
After the Windows driver is installed, you will then install the WinTV
application software from the WinTV Installation CD-ROM
✓
Finally, if necessary, an updated Windows Direct Draw Driver can be
installed from the WinTV Installation CD-ROM
WinTV board diagram
The following diagram shows the main functions and connectors of the
WinTV board. Since there are several different models with different
features and functions, your board may not have all of the components
installed.
Board connections
FM: FM radio antenna connection (some models)
TV: TV antenna or cable TV connection
Audio LineOut: Audio output 1/8” minijack (connects to sound
card LineIn jack)
Video In: VideoInput jack (S-Video on some models)
Audio Line In: Audio input 1/8' minijack J2, left/right channel
Remote Control: Minijack J3 (optional on some models)
1-1