Hauppauge WinTV USB, Installation And Reference Manual

Page: 14 / 55

If LineIn is muted, unmute it to hear audio from the WinTV.
You should see Line-In balance as one of the selections. If not, then
click on
Options/Properties and under Show the following vol-
ume controls check Line-In . Then click OK .
You should now see a selection for Line-In . Make sure the Select
box is checked, then raise the volume to about 1/2 of the way to the
top. This should be a good starting point for the volume control.
In the WinTV application under the Configure/Audio menu, the Mixer
ID should be set at Line-In .
As you adjust the audio volume in the WinTV application, you should
see the slide bar in the VolumeControl window rise and fall.
WinTV
Installation and Reference Manual
1-7