Hauppauge WinTV USB, Installation And Reference Manual

Page: 24 / 55

File Button:
Clicking the File button opens the File menu. The
last file recorded is listed in the File name box. In the File menu
you can: Rename your recorded video file, Play a video file previ-
ously recorded, Delete recorded video files.
If you have problems with audio:
If you find that there is no audio while playing your video recordings, this is
often due to the sound card not being setup to record audio from its 'Line-in'
socket. To enable audio recording, open the
Recording Control panel by click-
ing
Start / Run
and then SNDVOL32 /REC . This will open the Recording
Control panel. Make sure that 'Line-in' is enabled (this is sometimes called 'Line'
or 'Aux').
Installing the IR Remote
Note: the IR remote control is found only on some WinTV models.
Note: Before installing the IR Remote for WinTV , make sure that the WinTV
application and radio application (only for the WinTV card with FM radio tuner)
work properly when using your mouse or keyboard.
To install the WinTV IR Remote hardware:
- turn off your computer. Plug the sub-mini jack at the end of the
IR
Receiver cable
into the
Remote control (IR) receiver socket
of
the WinTV card.
- place the
IR Receiver
on your desktop so that the infrared light from
the
IR Remote transmitter
can reach the IR Receiver.
- turn on your computer.
- If you have previously installed the WinTV applications, the IR soft-
ware should automatically run every time you reboot your PC. You
will see the
WinTV Remote icon
in the Device Tray. If not, look in
the
IR32 directory
of the
WinTV Installation CD-ROM
version 2.2
or later. Run
IR32.EXE
from this directory. The install procedure will
add a shortcut to IR.EXE to the Startup group, so that IR.EXE is
loaded every time after Windows has booted.
Checking the function of WinTV’s IR Remote
When your PC is booted, the WinTV’s Remote software is automatically
launched. You will see a
Remote icon in the device tray. Point the Remote
transmitter at the IR Remote receiver . When you click the TV button on
the Remote transmitter , after 3-4 seconds the Remote icon should flash,
WinTV
Installation and Reference Manual
3-5