Haulotte STAR 10, Maintenance Book

Page: 73 / 166

73 4000414930 E 10.15 USA / GB
Upper boom
Condition of the cables inspection - Criteria of replacement
MS0012
Upper boom
Condition of the cables inspection - Criteria of replacement
1 - You will need
2 - Preliminary operation
The operations of disassembling if they exist should be carried out only on the installations completely disconnected
and must be entrusted only to people having the necessary technical training.
Respect, in addition to the instructions appearing in the present instructions, the legal tendencies generally applicable
for safety accident prevention.
All the precautions must be done in work before intervening on and near the machine.
After completion of work, all the covers and safety devices must be positioned back completely and operational.
3 - Control wire rope system
To guarantee a full safety use of the machine , Haulotte recommends respecting the following inspections :
3.1 - DAILY CHECK
• To position the machine on a flat and firm ground.
• To put the machine under tension and select the ground control box.
• To raise the boom with horizontal (not necessary for masts type machine).
• To carry out a cycle of extending/retracting of the boom assembly on approximately 2 m (6ft 7 in) or of
rising/lowering for masts type machines.
• To check the synchronization and the symmetry of the movements and the absence of abnormal noises.
If these phenomena occur, carry out a reinforced control (see paragraph below).
• Standard tool kit
• Protective goggles
• Gloves
• Place barriers around the perimeter of the work area
Exclusively use tools and auxiliary average adapted. Always wear necessary safety clothing.