Haulotte STAR 10, Maintenance Book

Page: 57 / 166

57 4000414930 E 10.15 USA / GB
General data
Cylinder inspection
MS0003
General data
Cylinder inspection
1 - You will need
2 - Preliminary operation
The operations of disassembling if they exist should be carried out only on the installations completely disconnected
and must be entrusted only to people having the necessary technical training.
Respect, in addition to the instructions appearing in the present instructions, the legal tendencies generally applicable
for safety accident prevention.
All the precautions must be done in work before intervening on and near the machine.
After completion of work, all the covers and safety devices must be positioned back completely and operational.
3 - Control and maintenance
3.1 - VISUAL INSPECTIONS
The hydraulic actuating cylinders must be subjected to visual inspections periodic all the 250 hours or 6
months such as defined below :
• Absence of leakage.
• Absence of deformations, visible damage , cracks on the body and fixing of the cylinder.
• Absence of rust and shock on the rod.
• Absence of foreign body on all surfaces.
• Absence of missing or loosened part (bolt, nut, connection, flexible device, etc).
• Standard tool kit
• Protective goggles
• Gloves
• Place barriers around the perimeter of the work area
Exclusively use tools and auxiliary average adapted. Always wear necessary safety clothing.
For safety reasons, imperatively respect the following stages during the tests :
• To set up a beaconing of safety around the test area.
• To put the machine in stowed position.
• Use safety straps.