Haulotte HA100RTJ PRO, Maintenance Book

Page: 51 / 156

A
B
C
D
E
F
G
H
I
51
4000392150 E02.16 USA / GB
HA32RTJ PRO - HA100RTJ PRO - HA41RTJ PRO - HA130RTJ PRO
C
- Maintenance
6 - Major inspection
Major inspection allow determining the suitability, integrity and proper functioning of the machine : It
must take place when the machine is 10 years or 5000 h after renewed every 5 years.
This inspection is the responsibility of the owner, and it must be conducted by a HAULOTTE Services®
technician.
This inspection includes the daily, periodic and reinforced inspections. Refer to the Operators manual
for further information.
Major inspection
In addition with daily, periodic,
and reinforced inspections
Visual inspection with small disassembly or
movement needed to reach the part.
Replacement is necessary.
Systematic replacement
Proof tests. Need HAULOTTE Services® authorization. For countries where machines are not subject to
controlled periodic maintenance.
Yes No Corrected Not applicable
Frame, axle, steering system, stabilizers arms ...
No deterioration and visible damage
Pin, pin stop, bearing ...
Bushes and bearing replacement realized
Pulleys, chains and wire rope
Chains and wire rope replacement realized
Wear pads and devices of guidance
Wear pads replacement realized
Cylinder and hydraulic component : pump, filters, manifold
Adjusting the hydraulic pressure realized
Additional inspection
Daily inspection checked
Periodic inspection checked
Maintenance program realized