Haulotte HA100JRT, Operator'S Manual

Page: 32 / 122

32 4000328850 E 12 14 USA / GB
HA32PX - HA100JRT - HA41PX-NT - HA130JRT-NT
B
- Familiarization
3.2.2 - LEDs Display Panel (LED'S 1 - 10)
I n d i c a t o r s / C l u s t e r
Marking Description
LED 1
Overriding system :
• Permanently lighted while the overriding switch is being used
LED 2
Fault :
• Rapid flashing if a fault is active (current defect)
• Flashing if the service counter is at zero
LED 3
1
1. If machine equipped with dual load
Radius limitation
• Flashing : Calibration fault or automatic reach limitation
• Permanently lighted : Movement disabled by the reach limitation system
LED 4
Overload (For CE standard only) :
• Rapid flashing : Faulty weighing system
• Illuminated in case of overload
LED 5
Combustion engine pre-heating
• Illuminated while engine is pre-heating
• Off if engine started and if post-heating
LED 6
Engine warning
• Flashing : 5 flashes when ignition is switched on if service counter is less than 20 hours
• Constantly on : If the service counter is at zero
LED 7
Engine shutdown :
• Lighted in case of major engine fault (e.g. engine overheating, oil pressure, alternator fault, etc.)
• Lighted in case of faults managed by the engine ECU
LED 8
2
DPF regeneration inhibited (DPF : Diesel Particulate Filter)
LED 9
3
DPF regeneration required :
• Permanently lighted if the particle filter requires regeneration with a high clogging level (DPF : Diesel
Particulate Filter)
LED 10
4
DPF regeneration in progress, high temperature in the exhaust system ( HEST ) (HEST :
High Exhaust System Temperature)